Le-Roy Weldon’s 8972 Coat – Part 1 – Construction

January 28, 2017   /   byLynne  / Categories :  Feeds
My winter coat is finally finished, and it turns out that I have a lot to say about it, so I'm going to break it down into two posts.  This one will be the inspiration and sewing deets, and this one is the photos of the finished coat.  I totally get it if you just want to look at the photos!
 

Inspiration

It's no secret that I love 1950s and 60s styles, so it followed that I would want to make a coat in that style too.  I had originally planned to make this pattern, which I got on ebay last year.

 

It's Le-Roy Weldon's 8753 in size 14, and as it's from the 1960s, it's a single sized pattern.  The measurements for size 14 were right for me, but it turns out that there is a lot of ease on old patterns as well as new ones', because when I made a toile, it was too big!  I don't have any pattern grading knowledge, so hunted for another pea coat pattern.  Long story short, the perfect one was from Sew Over It, but it had only been available as a class.  So I emailed them to see if I could buy it, and they kindly emailed me back to say that unfortunately they were not planning on releasing it at the minute.  I'm holding out hope though, because it also has those lovely Dior darts.


Anyway, I stumbled across another Le-Roy Weldon's pattern on ebay for the princely sum of £2.50 .  This one is 8972, and is a size 12.  One toile later, it fitted perfectly at the shoulders, back and bust.  Which leads me onto fitting.

Fitting

The sleeves were a bit long, so I took 1.5cm out above and below the elbow, so the elbow darts would be in the right place.  I used the coat length from View B (the pink one on the right), which comes to just above my knees.  The coat was too narrow from the fourth button down, so I measured how much extra room I needed, and added it to the seams down to the hem.  Another toile, and it was perfect!

Construction

Sleeves

My favourite part are the sleeves.  They are shaped with two darts at the elbow.  I sewed them up, put them on the floor to admire them, and couldn't get over their loveliness!  You can see how the bottom of the sleeves curves towards the front.  This made me very happy!
   
 

 

I used the bias strip method to gather the sleeve head, here's a video about it from Gertie's Blog For Better Sewing.  Honestly, this works like a charm!


Also, I read somewhere (can't remember where), about folding the bias strip back on itself once it's sewn in, then stitching it in place - this helps to fill out the sleeve head.  I did it, and love how the sleeve head looks!  


Back Stay

I tried drafting a back stay from the pattern pieces, as from my tailoring book "Tailoring: The Classic Guide To Sewing The Perfect Jacket".  It didn't work too well, so I winged it, and traced around the edge of the back of my coat, and it turned out fine.  The back stay fabric is some medium weight cotton from Ikea that I use for toiles. 


Buttonholes

I knew I wanted to make bound buttonholes, and had made them before using the patch method.  I wasn't very happy with this method, as I found it tricky to get the frames of the buttonholes to be even.  So this time, I used Karen from Did You Make That's ebook on bound buttonholes.  This method uses welts to make the buttonhole frames, as in a welt pocket, and was soooo much easier!  I'll definately be using this method again.  


Here's what they look like from the inside - the back of the bound buttonholes are on the right, and the back of the facing is on the left.  Now, you may be wondering why there are machined buttonholes on the facing instead of the traditional "windows".  Well, I'll tell you!  

This fabric (which I will talk about in a minute) is quite thick, and the buttonholes are a bit bulky.  I didn't want to add more bulk with the "windows", and then remembered the buttonholes on a linen mix coat I have.  It has bound buttonholes, with machined buttonholes on the back, which are sewn together.  So I copied that, and it worked!

Might need to sponge off the yellow chalk!

Fabric

My fabric is some Loden fabric from My Fabrics, which is gorgeous.  I got 3 metres, and have enough left for a skirt.  The lining is also from My Fabrics, but I can't remember exactly what it is.  

I had wanted to make fabric covered buttons, but it turnes out this fabric is too thick for that, so I got some brass coloured buttons in The Spinning Wheel in Belfast.  The back of the buttons are stabilised with clear buttons.


I absolutely love my coat, and am really proud of it!  It's definately the best thing I've ever made, and took about a month to make.  When I went to clean my machine, once it was finished, the bobbin casing looked like Kermit The Frog's insides!!

Click on over to this post to see it in all it's glory!

 

Lynne

This is a syndicated post. Please visit the original author at Ozzy Blackbeard

You may like


Sharp Corners with Chain Stitch

In her Field Guide to Birds, Carolyn Hedge Baird recommends Chain Stitch as one of only a few stitches great for outlining. I agree and I love to use and recommend it for thick outlines. There’s little problem with it if the line is straight or curvy. But what if your area has corners or […]

The post Sharp Corners with Chain Stitch appeared first on Nuts about Needlepoint.

read more

DIY Perfect fall dress

DIY Perfect fall dress

When the seasons start to change, selecting fabric can be a bit tricky.  I’m still inclined to purchase lighter fabric but in a darker color.  My solution is to simply line the fabric with my trusty… View Post

read more

Butterick 6289 top and Style Arc April pants

Butterick 6289 was an impulse purchase the last time that Spotlight had Butterick patterns on sale.  You know how it is – they never seem to have the pattern that you really wanted, so you buy another one that you sort of like to make up the numbers to get the special offer?  This pattern… Continue reading Butterick 6289 top and Style Arc April pants

read more

A Sassy New Serger

Yesterday, this little girl arrived!A new toy to play with! I would love suggestions about thread to use and/or avoid. Hoping this serger will get some use this Winter. I have a few knits stashed away, and I can’t wait to get started (as long as I don’…

read more