How to Sew Four-Step ButtonholesApril 12, 2017 / byTilly / Categories : Feeds
Sewing buttonholes is one of those techniques that many beginner stitchers try to avoid… but once you get to grips with them, buttonholes are honestly pretty straightforward! Plus it’s a great skill to have under your (handmade) belt, as it opens up a whole world of shirts, blouses, dresses, skirts and more.
In this post I’m going to take you through sewing four-step buttonholes on a mechanical sewing machine. Check out my post of making one-step buttonholes on a digital machine too. (If you’re not sure which type of buttonholes your sewing machine makes, take a look at the manual.)
Four-step buttonholes take a bit more effort than the one-step kind, but the good thing about them is you have more control over how they turn out. Always always always test sew a buttonhole (or five) on a double scrap of your fabric (interfaced if your project) before starting on your precious garment, so you have a chance to alter the settings and check everything is in order first. The other key with four-step buttonholes is to ensure that you’re stitching them to the correct length.
Mark the buttonhole on your fabric. Attach the buttonhole foot to your sewing machine, and position the fabric underneath it so the window is showing the full buttonhole and the top end of the buttonhole (the end furthest away from you) is underneath the needle. Lace the thread under the foot and towards the back.
Set the stitch length to 0.5 to 1mm. We’re going to start by sewing the left side of the buttonhole – set your machine to buttonhole stitch 1 (check your manual if you’re not sure which one that is, or if your machine looks different to mine).
Put your foot down on the pedal to start sewing – your machine will make short, dense zigzag stitches to form the left-hand side of the buttonhole. Stop sewing when you reach the bottom of the buttonhole marking. You want to end with the needle on the left of the zigzag – turn the handwheel if it hasn’t already landed on the left.
Now set the machine to buttonhole stitch 2/4. Slowly sew five stitches to form the bottom of the buttonhole, stopping with the needle on the right.
To sew the right-hand side of the buttonhole, set the machine to buttonhole stitch 3. Sew until you reach the top of the buttonhole marking.
Set the machine to buttonhole stitch 2/4 again and sew about five stitches across the top of the buttonhole.
Finally, set the machine to the straight stitch and sew a couple of stitches and reverse stitches over the top of the buttonhole to secure the threads in place.
And that’s it!
Now you can open up your buttonhole with a seam ripper. It's a good idea to stick a pin in each end to act as a buffer so you don't accidentally rip through your fabric :)
PS. If you’d like to watch a video lesson on making buttonholes, check out my online workshop, Sew Your Own Shirt or Shirt Dress.
This is a syndicated post. Please visit the original author at Tilly and the Buttons
You may like
I’ve been making lots of grey items this year, it’s a colour I really like, especially for the winter. It’s going to be overtaken by blue for the spring and summer soon! Back in January, or maybe even February, I finally made the Lark Tee. It had been on the list to make last Spring, … Continue reading “Fade to Grey”read more
Hey y’all! We have a sewalong planned for our latest pattern, the Kalle Shirt + Shirtdress. There are lots of
OTHER BLOG FAVORITES
Welcome back to day 2 of the Lodo Dress Sewalong. I am excited to get sewing. Today we are going to be tackling the back seam, back slit for View A and sewing up the shoulder seams. Super easy. Let’s get started. Step 1 – (This Step is for View A Only. View B starts at Step 3 so go ahead and skip on down to Step 3 if you are sewing the shorter version without a back slit.) Remember that all seam allowances are 3/8″ unless otherwise stated in the instructions. If you want to finish the seams with a serger you will want to do that now. You can serge each back seam independently before sewing them together. Since knits do not fray this is not necessary. I am going to opt out on serging View A (but will serge View B so that you can see both). You will be sewing this step using a stretch stitch. If your machine has a stretch stitch it will look something like a lightning bolt. No. 9 on my machine. If you don’t have one of those stitches on your machine you can also use a zigzag stitch and just […]read more
It’s always so mysterious how a pretty little skein will work up, isn’t it? Especially with variegated yarn! I dyed up a little (well, BIG) skein and made swatches in knitting, crocheting and weaving! And they’re SO different! Here’s the skein I dyed (if you want to try it, check my tutorial on how to […]read more