How to Sew Four-Step ButtonholesApril 12, 2017 / byTilly / Categories : Feeds
Sewing buttonholes is one of those techniques that many beginner stitchers try to avoid… but once you get to grips with them, buttonholes are honestly pretty straightforward! Plus it’s a great skill to have under your (handmade) belt, as it opens up a whole world of shirts, blouses, dresses, skirts and more.
In this post I’m going to take you through sewing four-step buttonholes on a mechanical sewing machine. Check out my post of making one-step buttonholes on a digital machine too. (If you’re not sure which type of buttonholes your sewing machine makes, take a look at the manual.)
Four-step buttonholes take a bit more effort than the one-step kind, but the good thing about them is you have more control over how they turn out. Always always always test sew a buttonhole (or five) on a double scrap of your fabric (interfaced if your project) before starting on your precious garment, so you have a chance to alter the settings and check everything is in order first. The other key with four-step buttonholes is to ensure that you’re stitching them to the correct length.
Mark the buttonhole on your fabric. Attach the buttonhole foot to your sewing machine, and position the fabric underneath it so the window is showing the full buttonhole and the top end of the buttonhole (the end furthest away from you) is underneath the needle. Lace the thread under the foot and towards the back.
Set the stitch length to 0.5 to 1mm. We’re going to start by sewing the left side of the buttonhole – set your machine to buttonhole stitch 1 (check your manual if you’re not sure which one that is, or if your machine looks different to mine).
Put your foot down on the pedal to start sewing – your machine will make short, dense zigzag stitches to form the left-hand side of the buttonhole. Stop sewing when you reach the bottom of the buttonhole marking. You want to end with the needle on the left of the zigzag – turn the handwheel if it hasn’t already landed on the left.
Now set the machine to buttonhole stitch 2/4. Slowly sew five stitches to form the bottom of the buttonhole, stopping with the needle on the right.
To sew the right-hand side of the buttonhole, set the machine to buttonhole stitch 3. Sew until you reach the top of the buttonhole marking.
Set the machine to buttonhole stitch 2/4 again and sew about five stitches across the top of the buttonhole.
Finally, set the machine to the straight stitch and sew a couple of stitches and reverse stitches over the top of the buttonhole to secure the threads in place.
And that’s it!
Now you can open up your buttonhole with a seam ripper. It's a good idea to stick a pin in each end to act as a buffer so you don't accidentally rip through your fabric :)
PS. If you’d like to watch a video lesson on making buttonholes, check out my online workshop, Sew Your Own Shirt or Shirt Dress.
This is a syndicated post. Please visit the original author at Tilly and the Buttons
You may like
Leah Duncan‘s Las Formas is one of my favorite fabrics ever. It’s voile, it’s colorful, it’s organic, and the two Las Formas skirts I made for my daughters last Summer are the items they have worn most in the past year. A few weeks ago, Norah tore her skirt, and was on the verge of […]read more
So, let’s refresh ourselves shall we? Back in May, I bought three Hot Patterns to try them out and to see if they would fit me well. I had never tried Hot Patterns before but I have long admired their sassy line drawings. (Note to self: never, ever, ever rely on line drawings for informative consumer prices. Not that these drawings are misrepresentations of the patterns, but line drawn women always look so perfect with their wind-blown hair and sassy poses.)
Anyway, here is my dress version. Let’s see. I think it’s . . . okay. Initially, I was going for all purple, but then, obviously, I ran out of fabric. I chose the striped fabric because I knew I wouldn’t find anything to match it exactly. And I’ve learned that if you are going to mismatch, mismatch like a boss, meaning do it loud and proud. Here’s what I like. I like the yoke and overall shape. Yes, I think it would have been better in all one color. But I don’t think that’s the main issue.
Here’s what I really don’t like. I really don’t like the sleeve shape. This is a very soft fabric and the sleeve just kind of collapses. In a stiffer fabric, I’m afraid this would stick out like wings. If I make this again, I’ll have to re-draft them to make them sit like they should. The sleeves on this are rectangles, with no shape. Literally rectangles. And the longer 3/4 length sleeves are the same but just longer. I think they would have the same issues.
Good morning and happy Wednesday! Inadvertently continuing on with the “no shoulder” theme from Monday in today’s outfit – it’s hard to resist all of the cold-shoulder options right now. Hope you’re having a good week so far! *** Sweater – Milly (here | similar styles under $200 priced high to low: here, here and here) […]read more