OAL2017: Assembling the BodiceJune 9, 2017 / byLLADYBIRD / Categories : Feeds
Hey everyone, and welcome back to the second week of the 2017 OAL! This post today is all about assembling the bodice of the dress – stabilizing the neckline, sewing French seams, and attaching the facing.
A few things before we jump in:
- The pattern I using is the Kim Dress from By Hand London, but these method should apply to most any pattern that you are sewing!
- If you missed the first post, you can find it here.
- If you don’t give a shit about sewalongs and hate me right now (it’s cool, I don’t give a shit about anyone else’s sewalongs either haha), I promise it will be over soon! It is impossible to please everyone, but lord knows I try!
Your fabric should be cut, your markings all clipped and transferred to your pieces, and you should be ready to sew!
Before you drag your pieces over to the sewing machine, it’s a good idea to stabilize your neckline first. This will prevent it from stretching and distorting over time – which can happen both during the sewing, and over normal wear. They are multiple ways to stabilize a neckline – such a staystitching or using silk organza (here are 3 methods, all with their own tutorial!) – but for the purposes of this particular garment (considering how lightweight the fabric is, and also the overall casual-ness of the dress), I chose to use a lightweight fusible stay tape. This “extremely fine fusible knit stay tape” is the exact one I used – I bought it at my local Bernina dealer years ago, and it is especially helpful to stabilize shoulder seams on knits! Since it’s knit, it curves very easily, which makes it perfect for this pattern.
I fused my stay tape to the curved edges of both the front and back neckline, ending just before the tips of the strap ties. Since the seam allowances are 5/8″ and my stay tape is 1/2″, I made sure it was 1/4″ from the edge so I would be sure to catch it in my stitching. Since I am using stay tape, I did not staystitch these areas.
Now you’ll want to sew your front and back princess seams. Because my rayon is nice and lightweight, I using French seams, which I love because they conceal the raw edges beautifully. Pretty sure I don’t need to throw out another French seam tutorial into the WWW, but I was really having fun with this white piece of posterboard backdrop SO HERE YOU GET IT ANYWAY:
I start by placing the pieces WRONG SIDES TOGETHER and sewing with a 3/8″ seam allowance. Lay the piece flat and trim the seam allowances down quite aggressively – to about 1/8″. You want them to be smaller than the second seam you sew, so they don’t peek out.
I should mention – this is assuming you are using a pattern with a 5/8″ seam allowance. If your seam allowance is larger or smaller, you’l want to adjust your math accordingly.
Press the seam allowances open as best you can. They are tiny, so this won’t be the easiest thing – I’ve found I get the best luck if I use my fingernail to pry them open, and then the tip of the iron the whole way down. If you found you have cut them *too* small and simply cannot press them open, it’s acceptable to iron to one side.
At this point, your bodice is going to look at sorts of wrong. Just trust me here.
Now flip your pieces so the right sides are facing, effectively sandwiching the seam you just created. I like to take this to the iron and press right around the seamline I just sewed, so everything lies flat. Then sew along the edge at a 1/4″ seam allowance.
Press your seam allowances to one side, according to your pattern instructions. In the case of this pattern, we are pressing them toward the side seams.
Repeat for the remaining princess seams. Your front and back pieces should look like this.
Finally, sew your front and back pieces together at the side seams. Again, I used French seams for this.
Now to attach the facing! Start by fusing interfacing to the front and back facing pieces that you created. I used a very lightweight interfacing, and opted to cut it so that the interfacing does not extend all the way into the ties (I want those to stay soft and floppy!). To prevent a hard ridge from showing where the interfacing ends, I cut that with pinking shears.
Attach the front and back facings at the side seams, and press the seam allowances open (don’t worry about using French seams for this, unless you wanna be super extra or some shit). You will also want to finish the lower edge of your facing – I serged mine, to prevent it from fraying and also from showing bulk from the outside. You can also using pinking shears here, or bind the seam allowance.
Attach the facing to the bodice, all the way around the neckline and strap edges. Trim the seam allowances down, and then understitch to help turn the facing to the inside. You won’t be able to understitch all the way if you are doing tie straps – just go as far as you can.
Turn the facing to the inside of the bodice, and give it a good press. You’re done!
Ok, that’s all for this week! As always, let me know if you have any questions!
This is a syndicated post. Please visit the original author at LLADYBIRD
You may like
Objective: Convert a pattern for woven, elastic-waist pants, to a pattern for tie-front wrap pants From this: to this: Who’s it for? Anybody who wants to give it a try! Any restrictions? Before attempting this hack, you should be reasonably familiar with how regular pants go together Difficulty 2 out of 5. Supplies For drafting…read more
4 new videos are now available! I couldn’t be more excited! These videos are perfect for the visual learner. First off, I would like to share the important detail in that while the online workshop videos will be available for purchase individually, and that option will be forever, I have a 4-pack Video Bundle option at a […]read more
This fun little dress is (another) Safari Raglan, which is a pattern I am pretty obsessed with at the moment for sewing up quick little dresses and shirts for edison. If it looks familiar you’re pretty spot on, my first ever safari raglan was made up in the same main fabric, hehe. I just don’t really have many knits in my stash that are fun and not like… this ugly blue and this weird purple, and a lot of my sewing is spur of the moment with whatever I have in my stash.read more