Completed: Knot-Maste Top + Pneuma BraJuly 12, 2017 / byLLADYBIRD / Categories : Feeds
Hello hello! Sorry for essentially dropping off the face of the earth there for a minute – after I got home from Belize, I was immediately sucked into a full week of Maid of Honor duties (yes, my BFF got married!!!), including making a dress to wear in the wedding (more info on that once we get the photos back). The wedding was fantastic and I had loads of fun, but it feels pretty good to not be under anymore deadlines and have a chance to breathe finally!
This project is actually a pretty old one – I finished it ages ago. If these photos are confusing you, just know that I took them back in May when I was still in my old apartment. I was in the middle of packing – I think my sewing room was partially torn down by that point – hence the stack of boxes next to me. But, you know – better late than never!
Anyway, enough with the half-assed apologies – y’all’s is here for the SEWING, anyway!
This is the Knot-Maste Yoga top from Fehr Trade. When Melissa first introduced this pattern a few months ago, I bought it immediately because, tbh, it’s pretty bomb-ass. I’m definitely not the sort of person who wears workout clothes anywhere except to workout (and I am definitely the sort of person who always wants to ask the Yoga Moms at Whole Foods – you know, the ones in Lululemon with a full face of make-up and perfectly styled hair – how their workout went just because I am also an asshole), and my preferred workout duds can be described as “as little as I can get away with.” That being said, I don’t think this pattern – especially the top – should be restricted to only for exercising. I guess it depends on how much skin you like to bare outside the gym, but I totally saw this top as something I’d wear just as normal everyday clothes. And the bottoms could easily be the comfiest pajamas. Sold and sold!
Designed to be sewn in a lightweight, 4 way stretch knit (Melissa recommends using bamboo knit), this pattern features an open back that can be worn 2 ways. You can leave the ends loose for a really nice back breeze, or tie them together to make the shirt look fitted from the front (and also still get a lil’ bit of a back breeze). The idea is to get some airflow while you’re yoga-ing – but still be able to tie that floaty knit out of the way of your face while you’re in downward dog – but, again, it also totally works as something you can wear out and about and yet not look like you’re en route to a gym.
Either way, it’s a total mullet of a shirt. Business in the front, party in the back – woohoo!
I also love that it looks like a tshirt dress when it’s untied. Note to self: this is cute, make a tshirt dress.
To get the maximum impact of this pattern, lightweight + stretchy knits are key. You don’t want to make this out of anything that is even remotely thick – or even medium weight, to be honest. Think of the slinkiest, most obnoxious-to-sew knit, and that’s probably gonna be your best bet. Lightweight merino, bamboo knit, rayon, and cotton-spandex blends all work great.
For my particular version, I actually used a poly knit that I bought at Walmart, of all places. It cost me about $3 a yard, which I figured was a fair price to pay for what is essentially a wearable muslin. The weight and drape is spot on, but the fact that it’s polyester makes it pretty unbearable in the heat here – even with that back breeze. I know some people can handle poly in the summer, but I cannot! I’ll still wear this one because I’m bound and determined to suffer for fAsHuN, but I would love to make a replacement version in a more suitable fiber.
The pattern has some fun details, such as the knotted bands at the sleeves. This results in a completely wack looking pattern piece, but it comes together really satisfactorily. Be warned that there is a ton of hemming with this top – the sleeve bands and all around the bottom hem (if you’re making the longer, non-banded version), as well as the open back. The instructions suggest using a twin needle, but I opted for a zigzag as, again, this is just a wearable muslin. I also topstitched the neckband with a zigzag, so at least things would look cohesive.
As far as assembly, this was really easy to put together and doesn’t take much more time than sewing a plain tshirt. I did mess up the back overlap (one side is not as overlapped as it should be, whoops), but it doesn’t affect the fit at all. I sewed an XXS in the long (non-banded) version, and am very happy with the fit. I think the sleeves could stand to be shorter (I prefer to wear cap sleeves), if not eliminated altogether (sun’s out, gun’s out, y’all). I started to fiddle with the pattern to try to figure out a tank version and just got overwhelmed and gave up.
The only downside to this style of top is that your back bra band is visible no matter how you wear it. And while I am an advocate of going bra-less if you feel compelled to do so, this is sooo not the top for that (unless you get your rocks off being a breeze away from being considered a sex offender, I guess you do u). Which is why you get two projects in this post – I had to make a bra to wear under it!
The sports bra is the non-tank version of the Pneuma Tank from Papercut patterns. I’ve had this pattern in my stash since it was first released, but haven’t had the chance to make it up until this project screamed for it. Which is dumb, because it’s actually a pretty badass sports bra – it looks cool as shit, and gives me enough support for a light run (keep in mind that I don’t *need* a lot of support with the size of my rack so YMMV, my DDD+ sisters). I even wore this shit to powerwash my mom’s side deck. I just love clothing that has multiple uses.
As with the Knot Maste top, the back of the Pneuma tank is my favorite part. LOOK AT THAT SUNBURST OF PURE DELIGHT.
I sewed this one up in a size XXS, which is my typical size for Papercut Patterns. All the elastics were raided from my stash of bra-making supplies – including the yellow strap elastic, which I weirdly bought a few years ago and have never had a use for until now (it’s narrower than I like to wear my bra straps, and also a strange shade of yellow to try to match to anything!). The outer fabric is a swimsuit spandex from Mood Fabrics – the particular one I used is now sold out, but ummm they have some pretty rad ones up on their site right now! Apparently this one comes with 50+ SPF and ~aloe vera microcapsules~, whatever the fuck that means. I’ll let y’all know if my skin gets more supple in the future.
And here’s the back view on me! Despite having more straps than needed, this bra is surprisingly easy to put on (I haven’t had a tangled incident yet, knock on wood) and super comfortable to wear. Now that I know I like it as a bra, I’m even more keen to make the tank version. I’ll let y’all know how that goes when I get around to doing it in 5 years.
A few more construction notes – I lined the front and back with lightweight power mesh, for additional support/compression and a little bit more modesty. The seams are sewn with a serger, and the elastic is applied with a regular sewing machine. I did move the straps to a better position in the front after taking these pieces, so there’s not that weird angle between the top of the front piece and where the strap is attached. I didn’t realize how stupid it looked until I was looking at the photos, ha.
Since this top is sewn with a swimsuit fabric, that means I can actually wear it as a swimsuit! I didn’t make matching bottoms, but my black swimsuit bottoms go quite well with the colors in this one.
Anyway, I think that’s all for this set! Just writing about how awesome that top is makes me want to make another one in a less shitty fabric, ha. As a side note, I did also make the pants that are part of the Knot Maste duo- and they turned out great, but they are black and really underwhelming to photograph. I will not be writing a post on them, but I’m happy to answer any burning questions about them that you may have!
This is a syndicated post. Please visit the original author at LLADYBIRD
You may like
Decorating for Christmas took longer than expected at our new house, but it’s all finally up and I’m basking in the joy of multiple sparkling vintage aluminum Christmas trees, glittering ornaments, and the sounds of Christmas music. These shots will also be the first real look you’ll get to see of our new house with […]read more
There are some patterns that are the perfect starter project for a new knitter or ideal as a last-minute knitting gift – and the ‘Wham Bam Thank You Lamb‘ (WBTYL) neck warmer is just that. You can access the pattern on Ravelry…
The post L…