Webster Top & Dress Sewalong Day 4: All-in-one Facing

July 3, 2017   /   byCarrie McGowan  / Categories :  Feeds

Today we’ll be tackling the Webster Top & Dress’s all-in-one facing; which can be a bit fiddly but leaves us with a beautifully clean finish! Make sure you’ve sewn the shoulder seams of the outer shell and the facing, but not the side or center back seams.

Lay the shell out with the right side up just as you did when basting on the back straps. Place the facing on top, lining up the neckline with right sides together. Pin around the neckline, leaving a gap where indicated on the pattern. (This is where we’ll attach the other end of the back straps later.

Sew around the whole neckline, stopping and restarting at the two gaps. When you get to the point of the V in the front, leave the needle down and pivot the fabric to get a nice sharp point.

Snip into the seam allowance at the point of the V, right up to but not through the stitching line, to allow the facing to lie flay when finished.

Flip the facing out so both the right side of the dress and facing are visible. Press the seam allowance towards the facing and understitch the facing to the seam allowance 1/8″ from the seam you just created to help prevent the facing from rolling out. Make sure to leave the gaps you created in the last step unsewn!!

Now for the bit that makes this an all-in-one facing. Flip the facing back on top of the shell, right sides together, and align the armscyes. Pin and sew carefully around both armscyes, making sure the back straps are out of the way and not getting caught in the seam.

Next, we’re going to turn this right side out, which is a little tricky with an all-in-one facing. Starting from the front of the facing, reach in between the shell and the facing through the opening at the shoulder and pull the back through the opening until it’s all the way through. Repeat with the second side.

Press the facing flat, rolling it slightly in at the edges to prevent it peeking out, and congratulations! You’ve successfully sewn an all-in-one facing; your neckline and armholes are all finished!

That’s it for today! Next time, we’ll sew our side seams and center back seams and hem our dresses and tops.

The post Webster Top & Dress Sewalong Day 4: All-in-one Facing appeared first on Cashmerette.

This is a syndicated post. Please visit the original author at Cashmerette

You may like


Magnify Those Stitches

Here’s a sneak peek at a recent work in progress.  These jeans will be featured in an upcoming issue of Designs in Machine Embroidery and I’m excited to see them on the model. I know you’ve seen the flower patches in previous posts but check out the magnifying effect on this patch: Isn’t that fun? […] Read more…

read more

Sharp Corners with Chain Stitch

In her Field Guide to Birds, Carolyn Hedge Baird recommends Chain Stitch as one of only a few stitches great for outlining. I agree and I love to use and recommend it for thick outlines. There’s little problem with it if the line is straight or curvy. But what if your area has corners or […]

The post Sharp Corners with Chain Stitch appeared first on Nuts about Needlepoint.

read more

DIY Perfect fall dress

DIY Perfect fall dress

When the seasons start to change, selecting fabric can be a bit tricky.  I’m still inclined to purchase lighter fabric but in a darker color.  My solution is to simply line the fabric with my trusty… View Post

read more

Saturday Morning Quilt Break: Quilting with Tim Latimer

I first interviewed award-winning quilter Tim Latimer for a profile in the December/January 2014 issue of Quilters Newsletter. I had come to know his work by reading his blog, TimQuilts.com, where he showed his progress hand quilting vintage quilt tops … Continue reading

read more